The CarPro Polishing pad orange 130 mm is made of an open cell foam specifically designed for medium polishing on many paint types!

The dense elastomeric polymer foam interlayer provides the ability to easily maintain even pressure over curved surfaces whilst allowing vibration to be absorbed BEFORE it reaches the polishing surface.

This in turn allows the abrasives to do their job without the vibration affecting performance of finish.

The beveled profile allows the face of the pad to contour out away from the backing plate providing an extra level of precaution around tight spots while the “fast rebound” polishing foam surface makes it ideal for use with both Dual Action AND Rotary machines.

If versatility is important to you then the CarPro Polishing Pad is must!

• Fasten pad to machine taking care to securely center it on your backing plate
• Follow polish dependant tips
• Avoid overworking an area and do not hold pad still in one place
• When polishing, clean your pad after each section with your Foam Pad Brush before applying a couple more drops of polish for the next section.

Hand wash care

*Pads are machine washable in luke warm water.

Soak your polishing pads in luke warm water with diluted all purpose cleaner or a dedicated pad & microfiber cleaner for about 20 minutes so as to allow the product to loosen left over and clogged compound residue. Gently with your fingers agitate the pad to release more of the compound residue. Rinse the pads thoroughly in clean fresh water.

Lay your pads out to dry in a cool place, never directly in the sun and lay the pad with the velcro facing upwards, so to alleviate the velcro from delaminating and pealing off with the weight of the water.

See dedicated CARPRO MFX Microfiber detergent

Click on link to view our products at our Gauteng branch AUTOVANA– https://autovana.co.za/shop/